Відео

This isn't terrible. But if you do this with the live center place in location to where it will be and grind it there, it will match the runout of the spindle. You can put a grind wheel on an arbor in the jaws side. Then a diamond in the tool holder. Dress the correct angle in the wheel. Then you just do a plunge into the live center being spun by the drill. You will then have the perfect angle and runout matched to your jaws.

Hello sir, absolutely remarkable video, of great quality. Would you be so kind as to provide me with some information. Concerning the springs, do you have a link to order them or at least what diameter of wire did you choose? Another request concerns your threading tool, again a link for the body and the inserts would be very useful to me. I will try to carry out your work which will also make it possible to disengage the feed in the case of traditional carriage. Thank you in advance for a positive response and good luck. P.K.

For not owning a grinder this is not bad. I do use grinders and would make work of this in minutes.

👍👍👍

you are a true master of metal

You are Sensei Sir 🙏 No words can describe your superior skills 🙏

Здравствуйте очень интересно чем закончится

What can say ,lost as always

As always, perfect

Keren bos proses millingnya rapi and mulus 9:49

👍👌

Отлично сделано 👍😁

Non capisco a cosa serve.

Muito bom

Обожаю перфекционизм с которым он все делает

오평파.

오평파. 파키스탄 형님들 나와랑.

何気なく使っている治具がよく考えられていて、無駄がなく、汎用性が高いことが素晴らしい！ 作業手順を細かく撮影してくれていることも、とても勉強になるし、どういう点に注意を払えばいいのかがよくわかる。 いつもいい動画をありがとう！

Grinding dust is really dangerous for lath machines bed nice complete job softy apricot ion

Good job complied زبردست 👌 ڈایگرائنڈر

how to DIY Heavy Duty Drill Press

Using center to square up tap nice touch :)

汎用旋盤でもアイディア次第で旋盤の無限拡張の動画です。

What kind of lathe is that?

Beautiful work and a nice addition to the thread die holder 😀👍 I always like the hss cut of tool you use for parting of and making grooves. What angle do you grind the part off tool ?. Please keep sharing these great videos 😀👍

سبحان الله وبحمده سبحان الله العظيم سبحان الله وبحمده سبحان الله العظيم ❤❤❤

Again beautiful craftsmanship 👍😀...

Dokładność precyzja i spokój . BRAWO...

A much easier way than that to produce hexagon, I’ll show you one day.

助手席で足の臭い上司が靴を脱いだあの時を思い出しました 外気導入側へレバーを動かすタイミングが難しかったです

Hello From Australia, I am a machinist as well. What a great idea in cutting such a high-tolerance thread. I wish I was closer to, Japan as you have such great made tools & machines. Love the professional Video editing. I have subscribed & Liked. Will watch all of your Channel.

это!!! Можно купить?

Can you make a tap holder as well to fit different tap sizes from 3mm to 20mm ? I would like to tap a thread without the tap spinning, and just use the machine to do it without slipping out of place.

Çok işime yaradı hemen deneyeceğim ama çelik ile.

Muito bonito e prazeiroso fazer trabalhos como estes. Parabéns ❤

This is good for watching but to teach people, be sure to accompany the video with words, this is even better if not this magnificent

пока тут микрометром выставлялись, пакистанцы уже сделали 5 деталей

❤👍👍👍

市販の方ももう少し威力をあげて欲しいね

ねじ切りはハーフナットを外すタイミングが難しいので良い方法です。

Why do you have an arrow drawn on the chuck pointing to the chuck key socket?

incredible

これでUFOを作りたいと真面目に考えてる

The saw not being concentric with the spindle always bothers me

1045 steel, очень хорошая сталь по обработке смотря по видео? Резец быстро садится?

The below center facing pass at the beginning bothered me so much. 😂 Nice job as usual though.

beautiful work

music very nice

Супер.

Sir you can use two cuttar and both said at a taime